·11 min read

Quant Level Strategy

7 references, link-verified · inline [n] markersEditor of record: Shane CantyStandards review editorial standard · audit log

Abstract. Key levels are easy to draw and hard to trade, because the same level behaves differently depending on the market around it. This paper documents a discretionary intraday method for Nasdaq-100 futures (NQ and MNQ) on the 1-minute chart. Levels come from three sources: the Session Volume Profile, the session VWAP with its two-standard-deviation bands, and the prior day's high and low. Context comes from a custom TradingView indicator, Regime Dashboard + Zones + VWAP. It reports the 15-minute regime (trend, range or transition), the 15-minute volatility state and the 4-hour bias without leaving the 1-minute chart. The method is a fixed sequence of questions asked when price reaches a cluster of levels. Each answer changes whether to trade, which direction, where the stop goes and what the target is. The method is built and the indicator is published, but it has not been backtested or forward-tested. This paper makes no performance claim.

The problem

A VWAP touch that rejects cleanly in a quiet, two-sided session gets run over in a trending one. A stop sized for a calm morning gets swept in an expanded afternoon. Most level traders adjust for this by feel. This playbook makes the adjustment explicit. Before acting at a level, the trader answers four questions:

  1. Is price inside the session's value area?
  2. What regime is the market in?
  3. How volatile is it?
  4. Which way is the higher timeframe leaning?

The answers come from a dashboard on the chart, so the check takes seconds and works the same way every time.

Method

Chart setup

Two indicators go on an NQ or MNQ 1-minute chart.

Session Volume Profile (TradingView built-in), set as the author uses it:

SettingValue
Market onlySelected
Value Area Volume70
Row LayoutTicks Per Row
Row Size24 (6 index points on NQ, where one tick is 0.25)

The profile shows the developing point of control (POC), value area high (VAH), value area low (VAL) and the session's extremes. The value area is the price range that holds the chosen share of the session's volume, here 70% [1][2].

Regime Dashboard + Zones + VWAP (published on TradingView [7]), with these settings:

GroupSettingValue
DashboardRegime / volatility timeframe15 minutes
DashboardBias timeframe4 hours
DashboardFast / slow EMA20 / 50
DashboardADX length14
DashboardTrend if ADX at or above / Range if at or below25 / 20
DashboardATR length / ATR average length14 / 20
DashboardExpanded if ATR/average at or above / Compressed if at or below1.2 / 0.8
ZonesZone height5 points
ZonesFill transparency40
VWAPAnchor period / sourceSession / (H+L+C)/3
VWAPOffset0
VWAPBands calculation mode / multiplierStandard deviation / 2

What each level is used for

The method makes four working assumptions about the levels. They are the author's trading premises, not tested findings.

  • Inside the value area (between VAH and VAL), price is in balance, and a level there offers no edge.
  • The profile's extremes and the ±2σ VWAP bands mark stretched price, where reversals are most likely.
  • POC and VWAP are where price tends to return.
  • Prior-day highs and lows are strong reference levels. An untouched one can pull price toward it.

The decision sequence

  1. Stay on the 1-minute chart. The dashboard brings the 15-minute and 4-hour readings to it, so there is no switching between timeframes.
  2. Find clusters. A cluster is two or more levels that overlap or touch: VWAP, a ±2σ band, a prior-day zone, POC, VAH, VAL or a profile extreme.
  3. When price reaches a cluster, read four things:
    • Is price inside the 70% value area?
    • What is the regime?
    • What is the volatility?
    • What is the bias?
  4. Apply the rules:
    • Value area. Price inside the 70% area: no trade.
    • Direction. Trade with the 4-hour bias. Trade against it, in the direction of the 1-minute EMAs, only at the ±2σ bands or the volume-profile extremes.
    • Volatility.: Expanded: widen the stop or cut the number of contracts.
      • Normal: look for precise entries at the level itself.
    • Range regime. The target is a return to POC or VWAP.
    • Trend regime. Trail the stop behind each level price reclaims.
      • Price runs through VWAP and flips it: the stop moves just beyond VWAP.
      • Price breaks a prior-day high or low: the stop moves just beyond that level.
    • Transition regime (ADX between the two thresholds). The dashboard's tip is to reduce size or wait.
    • The magnet rule. Price often ignores regime, bias and levels to reach an untouched prior-day high or low. When price is running at one, wait until it has been tagged.
    • Stops. Place the stop beyond the cluster or beyond the wick. Which one depends on position size and volatility.
    • Entries. Enter on a touch, or on a candle close back inside the level (a fade) or outside it (a break).

Architecture

The dashboard computes its regime and volatility readings on the 15-minute timeframe and its bias on the 4-hour timeframe, then shows them in a table on the 1-minute chart. Every higher-timeframe value is taken from the last completed bar:

htfRegime() =>
    [p, m, a] = ta.dmi(adxLen, adxLen)
    at = ta.atr(atrLen)
    r  = at / ta.sma(at, atrAvgLen)
    [a[1], r[1]]

[adxHtf, volRatio] = request.security(syminfo.tickerid, regTf, htfRegime(), lookahead = barmerge.lookahead_on)

regime = adxHtf >= adxTrend ? "TREND" : adxHtf <= adxRange ? "RANGE" : "TRANSITION"
vol    = volRatio >= hiVol ? "EXPANDED" : volRatio <= loVol ? "COMPRESSED" : "NORMAL"

Offsetting the series by one bar and requesting it with lookahead_on is the documented way to read higher-timeframe data without repainting [5][6]. The value shown is the one from the last 15-minute bar that has closed. It updates once per bar and never changes after the fact.

Regime and volatility.: Regime comes from Wilder's Average Directional Index (ADX). ADX measures how strong a trend is, not which way it runs [3]. At or above 25 the regime is TREND, at or below 20 it is RANGE, and in between it is TRANSITION.

  • Volatility is the 14-bar Average True Range divided by its own 20-bar average [4]. A ratio at or above 1.2 is EXPANDED, at or below 0.8 is COMPRESSED, and otherwise NORMAL.

Bias. On the last completed 4-hour bar:

  • BULLISH: close is above EMA 20, EMA 20 is above EMA 50, and +DI is above −DI.
  • BEARISH: the mirror condition.
  • NEUTRAL: anything else.

The "Look for" tip. The fourth table row turns the readings into a plain-language tip:

ReadingTip
Trend, clear biasBreak & retest with bias
Trend, neutral biasWait: no clear bias
RangeFade levels to VWAP / POC
TransitionReduce size or wait

What the indicator draws on the chart:: EMA 20 and EMA 50 on the chart timeframe, coloured by which one is on top. This is the 1-minute bias the direction rule refers to.

  • A session-anchored VWAP that changes colour when price crosses it, so flips are visible.
  • The ±2σ bands, set two volume-weighted standard deviations from VWAP.
  • Prior-day high and low as 5-point boxes centred on each level.
  • An optional fade marker. It prints when a bar pierces a ±2σ band, closes back inside it, has a rejection wick of at least half its range, and trades at least 1.5 times its 20-bar average volume.

The published version was released on 2026-11-08. Its VWAP calculation is an original implementation anchored by session, week or month. Its source code is protected.

Results

Built and published, not yet validated. The method has no backtest and no forward-test record, and this paper reports no win rate, profit factor or return.

Several rules are discretionary, so the method cannot be backtested as written:

  • what counts as levels "touching";
  • what a precise entry means;
  • whether the stop goes past the cluster or past the wick.

Testing it honestly would first mean fixing each rule in numbers, registering the rules before looking at results, and measuring on data the rules were never tuned on, with realistic costs. The fade marker is the only fully mechanical part of the indicator. It is the natural first candidate for such a test.

Limitations

  • No evidence of edge. Every rule above is an untested premise. The assumptions about the value area, extremes, POC and the magnet rule are common in volume-profile trading, but this paper does not show that they hold for NQ.
  • ADX lags. ADX(14) uses Wilder smoothing, so on 15-minute bars it reflects several hours of price action. The regime label tends to change after a trend has already started or ended.
  • The thresholds are conventions, not results. The 25 and 20 ADX cutoffs and the 1.2 and 0.8 volatility ratios are customary starting points. They were not fitted or tested on NQ.
  • Readings can be stale. Because each reading comes from the last completed bar, the regime and volatility can be up to 15 minutes old and the bias up to 4 hours old.
  • Developing levels move. POC, VAH and VAL shift during the session. Early in the session they rest on little volume.
  • Session boundaries.: The VWAP resets at the futures trading-day boundary (6 p.m. ET for CME equity-index futures), so overnight trading is part of the day's VWAP.
    • The prior-day high and low come from the full electronic session, not regular trading hours only.
  • Fixed zone height. The 5-point zones do not scale with volatility. On a wide-range day they are small relative to normal noise.
  • The rules can conflict, and the order is left to the trader. The magnet rule can override the regime and bias rules, and the method does not rank them.
  • Position sizing is unquantified. "Widen the stop or cut contracts" does not say by how much. A fixed dollar risk per trade is the safer interpretation.
  • One-minute execution costs. One-minute entries carry slippage and commission costs that are large relative to small targets.

Conclusion

This playbook turns a common habit, adjusting level trades by feel, into an explicit checklist. Find where levels cluster. Skip the value area. Read the regime, volatility and bias from one table. Let those answers set the direction, stop and target. The indicator that supplies the readings is published and does not repaint. Whether the checklist improves results is an open question that only a pre-registered test can answer.

The indicator is published on TradingView as a protected script. Full implementation available on request.

References

  1. TradingView, "Volume profile indicators: basic concepts", https://www.tradingview.com/support/solutions/43000502040-volume-profile/
  2. TradingView, "Session Volume Profile", https://www.tradingview.com/support/solutions/43000703072-session-volume-profile/
  3. TradingView, "Average Directional Index (ADX)", https://www.tradingview.com/support/solutions/43000589099-average-directional-index-adx/
  4. TradingView, "Average True Range (ATR)", https://www.tradingview.com/support/solutions/43000501823-average-true-range-atr/
  5. TradingView Pine Script User Manual, "Repainting", https://www.tradingview.com/pine-script-docs/concepts/repainting/
  6. TradingView Pine Script User Manual, "Other timeframes and data", https://www.tradingview.com/pine-script-docs/concepts/other-timeframes-and-data/
  7. Regime Dashboard + Zones + VWAP, published by SeriviaCo80 on TradingView, https://www.tradingview.com/u/SeriviaCo80/#published-scripts

Prepared with AI assistance from the author's own trading notes and indicator code.

Key definitions

Value Area: The price range that holds a specified share of the session's volume; in this method, the 70% volume concentration.

Point of Control (POC): The price level with the highest traded volume during a session.

VWAP: Volume-weighted average price; the mean of price weighted by volume traded at each price level.

Average Directional Index (ADX): A trend-strength indicator (0-100) where values above 25 indicate a strong trend and values below 20 indicate range-bound conditions.

Average True Range (ATR): A volatility indicator measuring the average of the true range over a specified number of periods.

Regime: The market state classification: TREND for strong directional movement, RANGE for oscillation between levels, or TRANSITION for weak or changing direction.

Fade: A trading entry that anticipates price rejection of a level by entering after price pierces it and closes back inside.

Exponential Moving Average (EMA): A moving average that weights recent prices more heavily than older prices, responding quickly to price changes.


Educational research on historical data only. Not investment advice, not a signal, and never a performance promise. Past results do not predict future performance. Every reference is link-verified before publication and every paper is re-audited weekly against the library's editorial standard.

Last reviewed by the PropLedger research pipeline: 2026-11-15. Educational research on historical data, not financial advice.

Educational research on historical data only. Not investment advice, not a signal, and never a performance promise. Past results do not predict future performance. Every reference is link-verified before publication and every paper is re-audited weekly against the library's editorial standard. Found an error? Email support@prop-ledger.org and the paper is corrected or withdrawn.